transils

Transils (also know as transil) are electronic components similar to zener diodes that are designed especially to protect electronic circuits against overvoltage peaks. There are two kinds of transils:

Uni-directional transils: that are expecting overvoltage of a well known polarity
Bi-directional transils: that can handle overvoltage from both directions (they are made by internally connecting two uni-directional transils in piggy-back)

Usage

Typically the transils is connected between the electrical wire to protect and the ground. If the voltage on the protected wire becomes larger than the transils threshold, the transils conducts and creates a current towards the ground that prevents the voltage increase above the threshold.

Characterization

A Transils are characterised by

Breakdown voltage: the voltage above which the transils begins to conduct
Response time: this time must be the smallest possible because otherwise the circuits that need protection will be destroyed before the transils begins to act as a protection device
Parasitic capacitance: The non conducting transils behave like a capacitor. Its capacitance can affect the behavior of the electronic circuit it protects
Amount of energy it can dissipate: if this capacity is too small, the overvoltage will possibly destroy the transils and leave the circuit unprotected

Transils

Usage

Characterization

See also