|
|
|
|
|
Sydney Harbour TunnelThe Sydney Harbour Tunnel is a tunnel in Sydney, Australia. It was completed in August 1992 to provide a second vehicular crossing of Sydney Harbour to alleviate congestion on the Sydney Harbour Bridge. The tunnel is made up of three sections: twin 900 m land tunnels on the north shore, twin 400 m land tunnels on the south shore and a 960 m immersed tube (IMT) structure. The IMT structure consists of eight precast concrete units. The units were constructed over 100 km away in a dry dock at Port Kembla and then towed to Sydney Harbour. A trench was dredged prior to the arrival of the IMTs and then the IMTs were lowered into the trench by a system of pontoons and control towers. After the IMTs were in place the trenches were backfilled and then a rock armour was placed over the top to protect the units against marine hazards, such as anchors or sinking vessels. The land tunnels were constructed by a combination of driving and cut-and-cover techniques. The total construction cost of the project was A$554 million. It was designed to be strong enough to withstand the impact of eathquakes and sinking ships. It carries around 75,000 vehicles a day. Operations The tunnel has two lanes in each direction. The tunnel parallels the Sydney Harbour Bridge which has eight lanes, variable in direction. There is a southbound only toll for both tunnel and bridge. References - Pratley, Juliet (1993) "Sydney Harbour Tunnel", Concrete International 15 (7) 19-23.
|
 |
|
| Copyright 2005-2009 OnPedia.com. All Rights Reserved |
|
|