Other Definitions
output (enc)
output (dict)
|
Programmed Input/outputThe programmed input/output (PIO) interface was the original method used to transfer data between the CPU (through the IDE controller) and an IDE/ATA device. The PIO interface is grouped into different modes that correspond to different transfer rates. The electrical signalling among the different modes is similar - only the cycle time between transactions is reduced in order to achieve a higher transfer rate. All IDE/ATA devices support the slowest mode - Mode 0. By accessing the information registers (using Mode 0) on an IDE/ATA drive, the CPU is able to determine the maximum transfer rate for the device and configure the IDE controller for optimal performance. The PIO modes require a great deal of CPU overhead to configure a data transaction and transfer the data. Because of this inefficiency, the DMA (and eventually UDMA) interface was created to increase performance. The simple digital logic required to implement a PIO transfer still makes this transfer method useful today (especially if high transfer rates are not required). The modes are given below: PIO Modes | Mode | Maximum Transfer Rate (MB/s) | Standard Where Spec Was Defined |
|---|
| Mode 0 | 3.3 | ATA | | Mode 1 | 5.2 | ATA | | Mode 2 | 8.3 | ATA | | Mode 3 | 11.1 | ATA-2 | | Mode 4 | 16.7 | ATA-2 | See also
|
 |