neper

For Neper as a mythological god, see Neper (mythology) In electronics, a neper (Np) is a non-SI unit, accepted for use with SI, used to express ratios, such as gain, loss, and relative values. The name is derived from John Napier, the inventor of logarithms. Like the decibel it is a unit in a logarithmic scale, the difference being that where the bel uses base-10 logarithms to compute ratios, the neper uses base e (2.71828182846...). The value of a ratio in nepers, Np, is given by

Np = \ln\frac{x_1}{x_2} = \ln x_1 - \ln x_2

where

x_1

and

x_2

are the values of interest, and ln is the natural logarithm. The neper is often used to express voltage and current ratios, whereas the decibel is usually used to express power ratios. Taking that into account we have

1\ \mbox{Np} = \frac{20}{\ln 10}\ \mbox{dB} \approx 8.686\ \mbox{dB}

Like the decibel, the neper is a dimensionless unit. The ITU recognizes both units.

Sources

<< Previous

Word Browser

Next >>

mixer
sprague grundy theorem
mode field diameter
mode partition noise
mode scrambler
mode volume
modification of final judgment
modified ami code
modulation factor
modulation rate
mu law algorithm

multicast address
multilevel precedence and preemption
multipath
multiple access
multiple homing
multiplex baseband
multiplexing
multiport repeater
narrative traffic
narrowband modem
national communications system

national information infrastructure
near field diffraction pattern
near real time
negative acknowledge character
net gain
net operation
network administration
network architecture
network engineering
network interface
network interface device

network management
network operating system
network termination 1
network topology
neutral direct current telegraph system
noise
noise equivalent power
noise figure
noise level
noise power
noise temperature