multiplex baseband

In telecommunication, the term multiplex baseband has the following meanings: 1. In frequency-division multiplexing, the frequency band occupied by the aggregate of the signals in the line interconnecting the multiplexing and radio or line equipment. 2. In frequency division multiplexed carrier systems, at the input to any stage of frequency translation, the frequency band occupied. Note: For example, the output of a group multiplexer consists of a band of frequencies from 60 kHz to 108 kHz. This is the group-level baseband that results from combining 12 voice-frequency input channels, having a bandwidth of 4 kHz each, including guard bands. In turn, 5 groups are multiplexed into a super group having a baseband of 312 kHz to 552 kHz. This baseband, however, does not represent a group-level baseband. Ten super groups are in turn multiplexed into one master group, the output of which is a baseband that may be used to modulate a microwave-frequency carrier. Source: from Federal Standard 1037C and from MIL-STD-188

<< Previous

Word Browser

Next >>

maximum user signaling rate
mean time between failures
mean time between outages
mechanically induced modulation
mediation function
medium power talker
message
message format
micro mainframe link
minimum bend radius
mixer

sprague grundy theorem
mode field diameter
mode partition noise
mode scrambler
mode volume
modification of final judgment
modified ami code
modulation factor
modulation rate
mu law algorithm
multicast address

multilevel precedence and preemption
multipath
multiple access
multiple homing
multiplexing
multiport repeater
narrative traffic
narrowband modem
national communications system
national information infrastructure
near field diffraction pattern

near real time
negative acknowledge character
neper
net gain
net operation
network administration
network architecture
network engineering
network interface
network interface device
network management