|
|
|
|
|
Continuously Variable TransmissionA continuously variable transmission (CVT) is a type of automatic transmission that can change the "gear ratio" (gears are not generally involved) to any arbitrary setting within the limits. The CVT is not constrained to a small number of gear ratios, such as the 4 to 6 forward ratios in typical automotive transmissions. CVS control computers often emulate the traditional abrupt gear changes, especially at low speeds, because most drivers expect the sudden jerks and will reject a perfectly smooth transmission as lacking in apparent power. Pulley-based CVT This type of CVT uses pulleys, typically connected by a metal-covered rubber belt. A chain may also be used. A large pulley connected to a smaller pulley with a belt or chain will operate in the same manner as a large gear meshing with a smaller gear. Typical CVTs have pulleys formed as pairs of opposing cones. Moving the cones in and out has the effect of changing the pulley diameter, since the belt or chain must take a large-diameter path when the conical pulley halves are close together. Roller-based CVT Consider two almost-conical parts, point to point, with the sides dished in such that the two parts could fill the central hole of a torus. One part is the input, and the other part is the output. (they do not quite touch). Power is transferred from one side to the other by one or more rollers. When the roller's axis is perpendicular to the axis of the almost-conical parts, it contacts the almost-conical parts at same-diameter locations and thus gives a 1:1 gear ratio. The roller can be moved along the axis of the almost-conical parts, changing angle as needed to maintain contact. This will cause the roller to contact the almost-conical parts at varying and distinct diameters, giving a gear ratio of something other than 1:1. Hydraulic CVT Some continuously variable transmissions instead use a variable displacement pump and a hydraulic motor to transmit power. These types can generally transmit more torque, but they are very expensive to buy and maintain. However, they have the advantage that the hydraulic motor can be mounted directly to the wheel hub, allowing a more flexible suspension system and eliminating efficiency losses from friction in the drive shaft and differential components. Advantages and drawbacks CVTs have much smoother operation than hydraulic automatic transmissions, are simpler to build and repair and provide better fuel economy by avoiding torque converter losses. Their torque handling capability is limited by the friction and strength of the belt or chain, and so CVTs have typically been limited to low powered cars and other light duty applications. CVTs can smoothly compensate for changing vehicle speeds, allowing the engine speed to remain at its level of peak efficiency. This improves both fuel economy and exhaust emissions, but some car drivers are bothered by the resulting lack of feedback about vehicle speed provided by engine sound. One magazine described it as sounding like driving a powerboat when accelerating. The satisfying jerk of a non-CVT transmission can be emulated by CVT control software though, eliminating this marketing problem. History According to TOROTRAK, the first patent for a toroidal CVT was filed at the end of the 19th century http://www.torotrak.com/history.html. The first workable CVT, called VARIOMATIC, was designed and built by dutch Hub van Doorne, co-founder of DAF, in the late 1950s, specifically to produce an automatic transmission for a small, affordable car. The first DAF car using van Doorne's CVT was produced in 1958. Van Doorne's patents were later sold to Volvo along with DAF's car business. In the 1980s and 1990s, the Subaru Justy was offered with a CVT, but was not very successful in the marketplace and after a few years Subaru dropped the Justy from its product line. General Motors designed a CVT for use in small cars, which was first offered in 2002. After just three years, however, this transmission will be phased out in favor of conventional planetary automatic transmissions. CVT transmissions have been refined over the years and are much improved from their origins. Examples Many small tractors for home and garden use have simple CVTs, as do most snowmobiles. Almost all motor scooters today are equipped with CVT. Possibly the largest vehicle currently sold with a CVT is the Nissan Murano, a mid-size sport utility vehicle with a V6 engine sold in the North American market. The CVT is also available for Audi, Honda and Mini Cooper cars. Some combines have CVT. The machinery of a combine is ajusted to operate best at a particular engine speed. The CVT allows the forward speed of the combine to be adjusted independently of the machine speed. This allows the operator to slow down and speed up as needed to accomodate variations in thickness of the crop. External links
|
 |
|
| Copyright 2005-2009 OnPedia.com. All Rights Reserved |
|
|