|
|
|
|
|
Contact ProcessThe Contact Process is the current method of producing sulfuric acid in the high concentrations needed for industrial processes. Vanadium (V) oxide is the catalyst employed. In 1831, the British vinegar merchant Peregrine Phillips patented a far more economical process for producing sulfur trioxide and concentrated sulfuric acid than the previous method used for producing sulfuric acid. Manufacturing Sulfuric Acid by the Contact Process The process can be divided into three stages: - Preparation and purification of sulfur dioxide
- Catalytic oxidation of sulfur dioxide to sulfur trioxide
- Conversion of sulfur trioxide to sulfuric acid
Purification of air and SO2 is necessary to avoid catalyst poisoning (ie. removing catalytic activities). The gas is then washed with water and dried by H2SO4. To conserve energy, the mixture is heated by exhaust gases from the catalytic converter by heat exchangers. Sulfur dioxide and oxygen then react in the manner as follows: 2 SO2(g) + O2(g) ↔ 2 SO3(g)
ΔH = −197 kJ mol-1 To increase the reaction rate, high temperatures (450 °C), high pressures (200 kPa or 2 atm), and vanadium(V) oxide (V2O5) are used to ensure a 95% conversion. Hot sulfur trioxide passes through the heat exchanger and is dissolved in concentrated H2SO4 in the absorption tower to form oleum: H2SO4(l) + SO3 → H2S2O7(l) Note that directly dissolving SO3 in water is impractical due to the highly exothermic nature of the reaction. Mists are formed instead of a liquid. Oleum is reacted with water to form concentrated H2SO4. H2S2O7(l) + H2O(l) → 2 H2SO4(l)
|
 |
|
| Copyright 2005-2009 OnPedia.com. All Rights Reserved |
|
|