Bit Stuffing

In telecommunication, bit stuffing is the insertion of noninformation bits into data. Note 1: Stuffed bits should not be confused with overhead bits. Note 2: In data transmission, bit stuffing is used for various purposes, such as for synchronizing bit streams that do not necessarily have the same or rationally related bit rates, or to fill buffers or frames. The location of the stuffing bits is communicated to the receiving end of the data link, where these extra bits are removed to return the bit streams to their original bit rates or form. Bit stuffing may be used to synchronize several channels before multiplexing or to rate-match two single channels to each other. Synonym positive justification. Source: from Federal Standard 1037C and from MIL-STD-188

 

<< PreviousWord BrowserNext >>
base communications
basic exchange telecommunications radio service
basic service
basic service element
basic serving arrangement
bch code
beam diameter
beam divergence
beam steering
beamwidth
b8zs
bel
bias
bias distortion
bilateral synchronization
billboard antenna
binary notation
bipolar signal
bit count integrity
bit error ratio
bit inversion
bit pairing
bit robbing
bit sequence independence
bit slip
bit stream transmission
bit synchronous operation
black facsimile transmission
black noise
black recording
blind transmission
block
block check character
blocking
block transfer attempt
bonding
branch
brewster's angle
bridge to bridge station
bridging loss
brightness
b6zs
b3zs
buffer