|
|
Time-division Multiplexing Teletraffic Time Division Multiplexing Time-division multiplexing (TDM) is a type of digital multiplexing in which two or more apparently simultaneous channels are derived from a given frequency spectrum, i.e., bit stream, by interleaving pulses representing bits from different channels. In some TDM systems, successive pulses represent bits from successive channels, e.g., voice channels in a T1 system. In other systems different channels take turns using the channels for a group of successive pulse-times (a so-called "time slot"). What distinguishes coarse time-division multiplexing from packet switching is that the time-slots are pre-allocated to the channels, rather than arbitrated on a per-time slot basis. Uses of time-division multiplexing: - The PDH and SDH network transmission standards
- The GSM telephone system
- Fitted to locomotives to allow push-pull operation, and/or multiple working with another locomotive
This article was originally based on a Federal Standard 1037C entry is support of MIL-STD-188. Related Articles
|
 |