metric space

Other Definitions
metric space (dict)

In mathematics, a metric space is a set where a notion of distance between elements of the set is defined. The metric space which most closely corresponds to our intuitive understanding of space is the 3-dimensional Euclidean space. The Euclidean metric of this space defines the distance between two points as the length of the straight line connecting them. The geometry of the space depends on the metric chosen and by using a different metric we can construct interesting non-Euclidean geometries which are used in the general relativity. A metric space induces topological properties like open and closed sets which leads to the study of even more abstract topological spaces.

History

Maurice Frchet introduced metric spaces in his work Sur quelques points du calcul fonctionnel, Rendic. Circ. Mat. Palermo 22(1906) 1-74.

Definition

A metric space M is a set of points with an associated distance function (also called a metric) d : M M -> R (where R is the set of real numbers). For all x, y, z in M, this function is required to satisfy the following conditions:

d(x, y) ≥ 0 (non-negativity)
d(x, y) = 0 if and only if x = y (identity of indiscernibles)
d(x, y) = d(y, x) (symmetry)
d(x, z) ≤ d(x, y) + d(y, z) (triangle inequality).

These conditions express intuitive notions about the concept of distance. For example, that the distance between distinct points is positive and the distance from x to y is the same as the distance from y to x. The triangle inequality means that going from x to z directly, is no longer than going first from x to y, and then from y to z. In Euclidean geometry, this is easy to see. Metric spaces allow this concept to be extended to a more abstract setting. In metric spaces, one can talk about limits of sequences; a metric space in which every Cauchy sequence has a limit is said to be complete. A metric d on M is called intrinsic if any two points x and y in M can be joined by a curve with length arbitrarily close to d(x, y).

Examples

The discrete metric: d(x,y) = 0 if x = y else 1.
The real numbers with the distance function d(x, y) = |y - x| given by the absolute value, and more generally Euclidean n-space with the Euclidean distance, are complete metric spaces.
Hyperbolic plane.
Any normed vector space is a metric space by defining d(x, y) = ||y - x||, see also distances based on norms. (If such a space is complete, we call it a Banach space). Example:

the Manhattan norm gives rise to the Manhattan distance, where the distance between any two points, or vectors, is the sum of the distances between corresponding coordinates.

The British Rail metric (also called the Post Office metric) on a normed vector space, given by d(x, y)=||x|| + ||y|| for distinct points x and y, and d(x, x) = 0. The name alludes to the tendency of railway journeys (or letters) to proceed via London, which is identified with the origin.
The Chessboard distance, the number of moves a chess king would take to travel from x to y.
If X is some set and M is a metric space, then the set of all bounded functions f : X -> M (i.e. those functions whose image is a bounded subset of M) can be turned into a metric space by defining d(f, g) = sup_{x in X} d(f(x), g(x)) for any bounded functions f and g. If M is complete, then this space is complete as well.
The Levenshtein distance, also called character edit distance, is a measure of the similarity between two strings u and v. The distance is the minimal number of deletions, insertions, or substitutions required to transform u into v.
If X is a topological (or metric) space and M is a metric space, then the set of all bounded continuous functions from X to M forms a metric space if we define the metric as above: d(f, g) = sup_{x in X} d(f(x), g(x)) for any bounded continuous functions f and g. If M is complete, then this space is complete as well.
If M is a connected Riemannian manifold, then we can turn M into a metric space by defining the distance of two points as the infimum of the lengths of the paths (continuously differentiable curves) connecting them.
If G is an undirected connected graph, then the set V of vertices of G can be turned into a metric space by defining d(x, y) to be the length of the shortest path connecting the vertices x and y.
If M is a metric space, we can turn the set K(M) of all compact subsets of M into a metric space by defining the Hausdorff distance d(X, Y) = inf{r : for every x in X there exists a y in Y with d(x, y) < r and for every y in Y there exists an x in X such that d(x, y) < r)}. In this metric, two elements are close to each other if every element of one set is close to some element of the other set. One can show that K(M) is complete if M is complete.
The set of all (isometry classes of) compact metric spaces form a metric space with respect to Gromov-Hausdorff distance.

Metric spaces as topological spaces

In any metric space M we can define the open balls as the sets of the form

B(x; r) = {y in M : d(x,y) < r},

where x is in M and r is a positive real number, called the radius of the ball. A subset of M which is a union of (finitely or infinitely many) open balls is called an open set. The complement of an open set is called closed. Every metric space is automatically a topological space, the topology being the set of all open sets. A topological space which can arise in this way from a metric space is called a metrizable space; see the article on metrization theorems for further details. Since metric spaces are topological spaces, one has a notion of continuous function between metric spaces. Without referring to the topology, this notion can also be directly defined using limits of sequences; this is explained in the article on continuous functions.

Boundedness and compactness

A metric space M is called bounded if there exists some number r, such that d(x,y) ≤ r for all x and y in M. The smallest possible such r is called the diameter of M. The space M is called pre-compact or totally bounded if for every r > 0 there exist finitely many open balls of radius r whose union equals M. Since the set of the centres of these balls is finite, it has finite diameter, from which it follows (using the triangle inequality) that every totally bounded space is bounded. The converse does not hold, since any infinite set can be given the discrete metric (the first example above) under which it is bounded and yet not totally bounded. A useful characterisation of compactness for metric spaces is that a metric space is compact if and only if it is complete and totally bounded. Note that in the context of Intervals in the space of real numbers and occasionally regions in a Euclidean space Rⁿ a bounded set is referred to as "a finite interval" or "finite region". However boundedness should not in general be confused with "finite", which refers to the number of elements, not to how far the set extends; finiteness implies boundedness, but not conversely. By restricting the metric, any subset of a metric space is a metric space itself. We call such a subset complete, bounded, totally bounded or compact if it, considered as a metric space, has the corresponding property.

Separation properties and extension of continuous functions

Metric spaces are paracompact Hausdorff spaces and hence normal (indeed they are perfectly normal). An important consequence is that every metric space admits partitions of unity and that every continuous real-valued function defined on a closed subset of a metric space can be extended to a continuous map on the whole space (Tietze extension theorem). It is also true that every real-valued Lipschitz-continuous map defined on a subset of a metric space can be extended to a Lipschitz-continuous map on the whole space.

Distance between points and sets

A simple way to construct a function separating a point from a closed set (as required for a completely regular space) is to consider the distance between the point and the set. If (M,d) is a metric space, S is a subset of M and x is a point of M, we define the distance from x to S as

d(x,S) = inf {d(x,s) : s ∈ S}

Then d(x, S) = 0 if and only if x belongs to the closure of S. Furthermore, we have the following generalization of the triangle inequality:

d(x,S) ≤ d(x,y) + d(y,S)

which in particular shows that the map x |-> d(x,S) is continuous.

Identifying two metric spaces as equivalent

An isometry between two metric spaces (M₁, d₁) and (M₂, d₂) is a function f : M₁ → M₂ which preserves distances: d₂(f(x), f(y)) = d₁(x, y) for all x, y in M₁. Isometries are necessarily injective. We call two spaces isometrically isomorphic if there exists a bijective isometry between them. In this case, the two spaces are essentially identical. Isometries are often used in constructions where one space is embedded in another space. For instance, the completion of a metric space M involves an isometry from M into M', a quotient of the space Cauchy sequences on M. The original space M is thus isometrically isomorphic to a subspace of a complete metric space, and it is usually identified with this subspace. Other embedding constructions show that every metric space is isometrically isomorphic to a closed subset of some normed vector space and that every complete metric space is isometrically isomorphic to a closed subset of some Banach space.

Related concepts and alternative axiom systems

The property 1 (d(x, y) ≥ 0) follows from properties 2, 4 and 5 and does not have to be required separately. Some authors use the extended real number line and allow the distance function d to attain the value ∞. Such a metric is called an extended metric. Every extended metric can be rescaled to a finite metric (using d'(x, y) = d(x, y) / (1 + d(x, y)) or d''(x, y) = min(1, d(x, y))) and the two concepts of metric space are therefore equivalent as far as notions of topology (such as continuity or convergence) are concerned. A metric is called an ultrametric if it satisfies the following stronger version of the triangle inequality:

For all x, y, z in M, d(x, z) ≤ max(d(x, y), d(y, z))

If one drops property 3, one obtains pseudometric spaces. Dropping property 4 instead, one obtains quasimetric spaces. However, losing symmetry in this case, one usually changes property 3 such that both d(x,y)=0 and d(y,x)=0 are needed for x and y to be identified. All combinations of the above are possible and are referred to by their according names (such as quasi-pseudo-ultrametric). From the categorical point of view, the extended pseudometric and the extended pseudoquasimetric spaces, along with their corresponding nonexpansive maps, are the best behaved of the metric space categories. One can take arbitrary products and coproducts and form quotient objects within the given category. If one drops "extended", one can only take finite products and coproducts. If one drops "pseudo", one cannot take quotients. Approach spaces are a generalization of metric spaces that maintains these good categorical properties. The requirement that the metric takes values in [0,∞) can also be relaxed to consider metrics with values in other directed sets. The reformulation of the axioms in this case leads to the construction of uniform spaces: topological spaces with an abstract structure enabling one to compare the local topologies of different points.