|
|
|
|
|
Ieee 802.6IEEE 802.6 is a standard governed by the ANSI for Metropolitan Area Networks (MAN). It is an improvement of an older standard (also created by ANSI) which used the Fiber distributed data interface (FDDI) network structure. The FDDI-based standard failed due to its expensive implementation and lack of compatibility with current LAN standards. The IEEE 802.6 standard uses the Distributed Queue Dual Bus (DQDB) network form. This form supports 150 Mb/s transfer rates. It consists of two unconnected unidirectional buses. DQDB is rated for a maximum of 160 Km before significant signal degradation over fiberoptic cable with an optical wavelength of 1300nm. This standard has also failed, mostly due to the same reasons that the FDDI standard failed. Most MANs now use Synchronous Optical Network (SONET) or Asynchronous Transfer Mode (ATM) network designs, with recent designs using native Ethernet or MPLS.
|
 |
|
| Copyright 2005-2009 OnPedia.com. All Rights Reserved |
|
|