|
|
|
|
|
10Base-t10BASE-T is an implementation of Ethernet which allows stations to be attached via twisted pair cable. The name 10BASE-T is derived from several aspects of the physical medium. The 10 refers to the transmission speed of 10 Mbit/s. The BASE is short for baseband. This means only one Ethernet signal is present on the send and/or receive pair. In other words there is no multiplexing as with broadband transmissions. The T comes from twisted pair, which is the type of cable that is used. 10BASE-T uses RJ-45 jacks wired to either the TIA-568A or TIA-568B standard. Only the second and third pairs are used (orange and green). If the wiring standard is identical on both ends the segment is a patch cable suitable for transmission between a hub/switch/patch panel and a node. If the wiring standards are opposite on either end the segment is a crossover cable suitable for connecting a node to a node or a hub/switch to another hub/switch. The EIA/TIA 568 standards are as follows: | Pin !! Pair !! Wire !! Color | | 1 | 3 | 1 | white/green | | 2 | 3 | 2 | green/white | | 3 | 2 | 1 | white/orange | | 4 | 1 | 2 | blue/white | | 5 | 1 | 1 | white/blue | | 6 | 2 | 2 | orange/white | | 7 | 4 | 1 | white/brown | | 8 | 4 | 2 | brown/white | | Pin !! Pair !! Wire !! Color | | 1 | 2 | 1 | white/orange | | 2 | 2 | 2 | orange/white | | 3 | 3 | 1 | white/green | | 4 | 1 | 2 | blue/white | | 5 | 1 | 1 | white/blue | | 6 | 3 | 2 | green/white | | 7 | 4 | 1 | white/brown | | 8 | 4 | 2 | brown/white | 10BASE-T was the first vendor-independent standard implementation of Ethernet on twisted pair wiring. However, it was in fact an evolutionary development from AT&T StarLAN which had both 1 Mbit/s and 10 Mbit/s versions. 10BASE-T is essentially StarLAN-10 with the addition of the link-beat. In the OSI model, 10BASE-T is at the physical layer. Ethernet encompasses both addressing at the data link layer and a number of physical-layer implementations. In this model, 10BASE-T is one of the possible physical layer standards for ethernet-- some others include 10BASE2, 10BASE5, and 100BASE-TX. Network layer protocols, such as IP, do not generally need to know whether they are being hosted on 10BASE-T or not, provided they know that they are being hosted on Ethernet. See also
|
 |
|
| Copyright 2005-2009 OnPedia.com. All Rights Reserved |
|
|